FC 383 build thread

[fc383]

i'm finally getting around to starting this thread. so i'll get you up to date real quick.



well. it's started. here's the first pics of my progress. also. most of everything i took off is for sale. so if you need something just let me know

[fc383]

getting rid of all the junk.got the dash, seats, heater and a/c box out. next will be the carpet and clutch pedal and a bunch of wires.

[fc383]

i removed all the wires i would not need and now trying to mock everything up. the shifter is in the way of the center console so i think it will be gone. and i wanted to mount the mallory box in the glove box but the glove box is too small. so what do you guy's think about this location?

[fc383]

it needs come down 2 1/2 inches and maybe back a half an inch. but gives you a good idea whats in store.








[/quote]

[FCs Rule]

man that looks good what you doing with that 13b i want to make a coffe table out of it

[87-SBC-RX7]

I have been working on the same setup. I have a 383 mounted using the same motor plate. Your looks like it is going to be a beast.

[kukri]

My FC had a 383 as well mounted with motor plate Good luck with the torque monster

[fc383]

thanks. i found a epmty tranny i will bolt up and sun i'll try to get it as low and as far back as i can.

[fc383]

got the engine as far down and back as i could. time to weld the motor plate mounts. her are some mock up and fitting pics

[FCs Rule]

looks good man keep it up!