SOLD

UP FOR SALE MY 1993 Mazda LS1/T56 RX7. Car has a little over 97k on the chassis and a little over 55K on the Engine and Trans. Car runs great and strong. Has proven to be an excellent daily driver and weekend warrior. You will absolutely love the look and feel of this car. It turns heads where ever it goes. All information listed below. If you have any questions please pm me or call 1-870-530-8290 My name is Josh. Pictures Posted Below. If you want any additional photos let me know and I will send them to you.

INTERIOR:
Brand New Black Carpet and Hatch Carpet
Brand New Black Leather Seat Skins from Leatherseats.com
Red Bins, 1/4 panels, Divider, Kick Panels, Door Panels and Seatbelts.
Black Headliner w/Sunroof
Black Visors
All Guages Work (Oil Pressure has not been hooked up) ( Speed Odometer Revs at idle with tach; the speed od and tach wires may be to close together)
Optima Yellow Top Relocated to Passenger Bin
JVC AM/FM/CD Player
Black Speaker Grills in Rear 1/4 panels
Custom Speaker Brackets from Group Buy on the club
6x8 Pioneer Speakers In Rear (JUST INSTALLED)
4" Crossfire Speakers In Front (JUST INSTALLED)


EXTERIOR:
OEM Black Paint (Looks Awesome!)
Front Clip Repainted to get rid of rock chips
EVO-R Sleek Headlight Kit (HID)
Nightshaded and professionally cleared turn signals and side markers
Tint Dark as legal
18x8.5 Front 18x9.5 Rear MRR GT-1 Black with polished lip Wheels
Falken Ziex 512 Tires 70-80% Tread left front and back.
Posi Quiet Pads (NEW)
Cross Drilled/Slotted Rotors (NEW)
Aftermarket Keyless Entry/ Alarm with pager

ENGINE:
2001 LS1 56k Miles
LS6 Intake
Ported and Powdercoated Black Stock Throttle Body
Custom Cold Air Intake
JTR 1-3/4" Long Tube Headers Ceramic Coated
Y-Pipe Exhaust to 3 Chamber Flowmaster 3" Piping. Quiet at idle, Loud at WOT
Comp Cam 234/240 110LSA Lift: 593/606
Comp Cam 921 Valve Springs
LS1 Corvette Valve Covers Black with red lettering
Hinson Subframe
Hinson Torque Arm
Hinson Bumpsteer
Hinson Driveshaft (Steel)
USA Brakes Clutch Resevior from hinson
Heidts Adjustable Powersteering setup
Power Steering (WORKS GREAT HAS A NEW RACK AND PINION AND NEW PS PUMP)
AC PCM Controlled (Brand New Compressor) Kicks on and off at idle (not sure why) stays on while driving and blows COLD!
Heat
Computer Mounted in ABS Location
Corvette Radiator
New Water Pump
New Alternator
New PS PUMP
New A/C Compressor
Corvette FPR
Stock Fuel Lines
Holly High Flow Fuel Pump
TUNED BY RHINO79 on LS1tech.com ( you can type in rhino79 to research is tunes and for testimonials)

DRIVETRAIN:
2001 T56 6 Speed 56k
Installed Brand New Textrailia Z Grip Clutch and 18lb flywheel Less Than 200 Miles
Hinson Steel Drive Shaft
Installed Brand New KAAZ LSD 1.5way (Less Than 200 Miles) Set to 30% Lockup
Custom Short Shifter
2 New KYB Struts Up Front
FULL SUPERPRO SUSPENSION KIT INSTALLED
6 PILLOWBALLS REPLACED WITH DUST SHIELDS


FLAWS: Wish I could say there is none but there are a few.
Small Ding in Driver Door Easily Fixable
Rust on the front side of sunroof opening ( quoted 350 for repair from local body shop)
Passenger Door Handle Hard to open
Rear bumper burn spot above exhaust from previous owner not the exhaust on the car now.

This car has an aggresive cam. If interested in stock cam it is available. Stock TB also availabe if intersted. This car very streetable the way it is.

SOLD

32

no interest or comments?

bump

looks good.

if you could do something to make the headlights sit flush with the hood you'd have a real winner. Just trying to be helpful.

trust me that has been on my mind but I do not think that they are that bad at all. I plan on taking them out and using auto paint and clear to finish out and spice them up and then I will remount them a little better most likely but thanks for input for sure. I love picky people!!! Thanks guys

Thats how i would be too if it was my car, i am building/working on my DSM to be my daily and you should see the small shit i have changed.

Anywho nice car, i am really undecided on those headlights though.

Any info on the tune and power? Thats some important info i didn't see.

still working on tune and hopefully will be dynoing soon. I ll keep everyone updated

alright guys I am about to sell my house and build one. I am looking to get a shop put in for future car building in order to do this I need to sell this car. Its getting closer to building time so. I am going to let this go for a steal. Price Lowered to 25,000 NEG.

Video of Idle with current tune and Walk around of car posted.