View Single Post
  #62 (permalink)  
Old 01-25-2007, 05:36 PM
frijolee frijolee is online now
87 Octane Supporter
MAXIMUM OVERDRIVE!
 
Join Date: Jul 2005
Location: Pasadena
Posts: 2,457
iTrader: 4 / 100%
Default Re: Joel's LS1 FC master parts list / swap thread

Thread edited top to bottom with notes as applicable in hindsight.

A few more pics for y'all (I'll assume anyone on dial-up has cried mercy and given up by now):


The stock belly pan fits nice and tight around the JTR radiator with a little trimming. I took off my towhooks but that's what the radiator mounts to and where the majority of the trimming has to occur.

I quickly figured out that my 205/60r15 BFG g-force sports weren't going to make enough traction so I went ahead and installed my better wheels. Only weird thing was that they came with 235/45r17s all around even though the wheelset is a staggered 8" front 9" rear. If anything my traction when down with the old dried out Yokohama Avid A4's.


Lack of traction makes free mudflaps!


I decided I liked the 235/45 up front even though it's a tad taller than stock (might be a good thing with a long nose like mine). I bought a set of Bridgestone Potenza RE050A Pole Position's in the above up front and 255/40r17 in the rear. Need to get them installed, but haven't done it yet.

Finally I leave you with a nice glamour shot...



This car ROCKS!
-Joel
__________________
LS1 FC: breaking it in, working out the bugs...
Link to my swap (HEY NEWBIE I wrote this for you)

Reply With Quote